home ordering shopping cart about



Audio Record/Playback Technical Details



Zorin's Audio Playback Board (A.K.A. Audio Record/Playback Board) has been designed to be flexible and fit many applications. Pushbuttons can be connected directly to pins shown on the left for simple applications. Hold the "Record" button to record the entire time available on that particular chip. Press one of the play control lines to hear it on the speaker. Different chips have slightly different control schemes.

Using the Audio Playback board with the ModCon or other controller allows you to take full advantage of all the features these chips contain. Four of the high address lines are available on the header shown in the photo allowing 16 individual messages, while the rest are available if a 20-pin header is used. All control lines are also on the upper half of the connector.

The speaker included with the kit plugs into the 4-pin connector shown at the bottom right, just underneath the electret microphone.

We've added some features to make this board easy to use.

  • The write protect jumper can be seen at the top left of the board, and protects against accidental overwriting of the recorded audio.
  • Pads are provided (at the top, just to the right of center) to support input from tape or other audio devices. The microphone circuit can be disconnected by cutting a bow tie and re-connected with a 2-pin jumper.

Stocked ISD Versions

CHIP Input Sample
Rate (kHz)
Pass
Band (kHz)
Control lines
used
ISD1420 6.4 2.7 /PLAYL, /PLAYE, /REC, /RECLED
ISD1416 8 3.4 /PLAYL, /PLAYE, /REC, /RECLED
ISD2575 6.4 2.7 /CE, PD, P/R, EOM, OVF
ISD2590 5.33 2.3 /CE, PD, P/R, EOM, OVF

To find out more about ISD's technology, check Information Storage Devices, Inc

The Audio Playback board is designed to fit in Zorin's Black Aluminum Case with the ModCon controller for desktop applications.

Copyright 1986-2020   Zorin   Seattle, WA   (206) 282-6061